CC = gcc
CFLAGS = -I. -std=gnu11 -Wall -W -pthread -O3 -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE $(FILED_EXTRA_CFLAGS)
LDFLAGS = -pthread $(FILED_EXTRA_LDFLAGS)
LIBS = -lpthread $(FILED_EXTRA_LIBS)
MIMETYPES = /etc/httpd/mime.types

PREFIX = /usr/local
prefix = $(PREFIX)
bindir = $(prefix)/bin

   1. Logging (CFLAGS, -DFILED_DONT_LOG=1)
	It is possible to disable ALL logging from filed.  When logging is
	completely disabled interlocks (mutexes) for the logging pointer are
	not engaged and the logging functions are not compiled at all.
	This results in a slightly smaller and faster binary

   2. Kill idle connections (CFLAGS, -DFILED_DONT_TIMEOUT=1)
        Killing idle connections relies heavily upon C11 atomics.  This
        requires a relatively new version of GCC (4.9+) or other C compiler
        that implements this aspect of C11 and so it can be disabled at
        compile time (which is the only time it makes sense).  One day an
        alternate implementation might be present that uses a mutex instead
        of atomics at which point this documentation will be updated.

   3. Debugging (CFLAGS, -DFILED_DEBUG=1)
	This is an internal option and should only be used during development.

   4. Differing HTTP semantics (CFLAGS, -DFILED_NONBLOCK_HTTP=1)
	It is possible that some HTTP clients may not process the HTTP stream
	being delivered if they cannot write to the HTTP stream itself.  This
	has not been observed yet, but it is possible.  If these semantics are
	needed (and they should not be) then they can be enabled with this
	flag at the cost of performance.

   5. Differing chroot() semantics (CFLAGS, -DFILED_FAKE_CHROOT=1)
        In some cases it is desirable to mangle paths with a path prefix
        rather than call chroot() at startup.  This is less secure and slower
        and should be generally avoided -- however it may be necessary to do.
        In these cases the executable may be compiled with the
        FILED_FAKE_CHROOT C preprocessor macro defined and instead of calling
        chroot() all HTTP requests will have the root suffix specified as the
        argument to the "-r" or "--root" option prepended to them.

   6. Differing "index.html" handling (CFLAGS, -DFILED_DONT_REDIRECT_DIRECTORIES=1)
        Normally "filed" redirects users who request a directory to the
        index.html file in that directory so that no memory allocations are
        required;  This option lets the server generate the new path.

   7. MIME Types (MIMETYPES)
	For single-file convenience "filed" compiles the mapping of file
	extensions (the string in the filename following its last dot ("."))
	into the executable.  This mapping comes from a file in the format of
		type1   type1_extension1 type1_extension2...
		type2   type2_extension1 type2_extension2...
		...
	However it may not be desirable to include this mapping, or it may be
	desirable to use your own mapping rather than the default one.  This
	can be done by specifying the MIMETYPES macro to "make".  If no
	mapping is desired, "/dev/null" may be specified.

Log Files
---------
Because "filed" relies on chroot(2) and setuid(2), log files cannot reliably
be re-opened.  If you need log rotation then a second process, which can close
and re-open log files, must be used.  Any process may be used for writing logs
but if the process does not support log rotation then it will not provide that
benefit.  For example, if you wish to write logs to syslogd(8) you can use
logger(1), such as:
	# ./filed --root /www --user nobody --log '|logger -t filed' --daemon

Troubleshooting
---------------
   1. It won't compile, something about stdatomic.h not found or _Atomic not
      a valid type.

      => This is a bug in your compiler:
            https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58016

         GCC 4.7.x and 4.8.x define the macro indicating that they have C11
         support and do not define the macro that C11 requires to indicate
         that C11 atomics are not available.  They should define that macro.

         You can disable the features in "filed" that require C11 atomics by
         defining FILED_DONT_TIMEOUT in the Makefile.

#include <stdarg.h>
#include <fcntl.h>
#include <stdio.h>
#include <errno.h>
#include <time.h>
#include <pwd.h>

/*
 * Determine if the C compiler supports C11 atomics
 */
#if __STDC_VERSION__ >= 201112L
#  ifndef __STDC_NO_ATOMICS__
#    define FILED_FEATURE_C11_ATOMICS 1
#  endif
#endif

/*
 * If the C compiler does not support C11 atomics, disable TIMEOUT support
 * since it relies upon it
 */
#ifndef FILED_FEATURE_C11_ATOMICS
#  define FILED_DONT_TIMEOUT 1
#endif

/*
 * These headers are only required for TIMEOUT support
 */
#ifndef FILED_DONT_TIMEOUT
#include <stdatomic.h>
#include <stdbool.h>
#endif

/* Compile time constants */
#define FILED_VERSION "1.21"
#define FILED_SENDFILE_MAX 16777215
#define FILED_MAX_FAILURE_COUNT 30
#define FILED_DEFAULT_TYPE "application/octet-stream"
#define FILED_PATH_BUFFER_SIZE 1010

/* Default values */
#define PORT 80
#define THREAD_COUNT 5
#define BIND_ADDR "::"
#define CACHE_SIZE 8209
#define LOG_FILE "-"

/* Fuzzing Test Code */
#ifdef FILED_TEST_AFL
#define FILED_DONT_LOG 1
#define FILED_DONT_TIMEOUT 1
#define pthread_create(a, x, y, z) afl_pthread_create(a, x, y, z)
#define bind(x, y, z) afl_bind(x, y, z)
#define socket(x, y, z) 8193
#define listen(x, y) 0
#define accept(x, y, z) afl_accept(x, y, z)
#define close(x) { if (strcmp(#x, "random_fd") == 0) { close(x); } else { exit(0); } }
#define fclose(x) exit(0)

	/* Message buffer for type = MESSAGE */
	/* Path buffer for type = TRANSFER */
	char buffer[FILED_PATH_BUFFER_SIZE];

	/* Items for type = TRANSFER */
	int http_code;
	const char *reason;

	time_t starttime;
	time_t endtime;
	off_t req_offset;
	off_t req_length;
	off_t sent_length;
	off_t file_length;
	char ip[128];

							break;
					}

					if (curr->endtime == ((time_t) -1)) {
						curr->endtime = now;
					}

					fprintf(fp, "TRANSFER METHOD=%s PATH=%s SRC=%s:%i TIME.START=%llu TIME.END=%llu CODE.VALUE=%u CODE.REASON=%s REQUEST.OFFSET=%llu REQUEST.LENGTH=%llu FILE.LENGTH=%llu TRANSFER.LENGTH=%llu",
						method,
						curr->buffer,
						curr->ip, curr->port,

						(unsigned long long) curr->starttime,
						(unsigned long long) curr->endtime,
						curr->http_code, curr->reason,
						(unsigned long long) curr->req_offset,
						(unsigned long long) curr->req_length,
						(unsigned long long) curr->file_length,
						(unsigned long long) curr->sent_length

	struct filed_log_entry *retval;

	retval = malloc(sizeof(*retval));

	if (initialize) {
		retval->buffer[0] = '\0';
		retval->http_code = -1;

		retval->starttime = 0;
		retval->endtime = 0;
		retval->req_offset = 0;
		retval->req_length = 0;
		retval->sent_length = 0;
		retval->file_length = 0;
		retval->ip[0] = '\0';

#ifdef FILED_DONT_TIMEOUT
#define filed_sockettimeout_thread_init() 0
#define filed_sockettimeout_init() 0
#define filed_sockettimeout_accept(x) /**/
#define filed_sockettimeout_processing_start(x) /**/
#define filed_sockettimeout_processing_end(x) /**/
#define filed_sockettimeout_close(x) /**/
#else
_Atomic time_t filed_sockettimeout_time;
struct {
	_Atomic time_t expiration_time;
	_Atomic pthread_t thread_id;



	bool valid;
}* filed_sockettimeout_sockstatus;
long filed_sockettimeout_sockstatus_length;
int filed_sockettimeout_devnull_fd;


static int filed_sockettimeout_sockfd_in_range(int sockfd) {
	if (sockfd < 3) {
		return(0);
	}

	if (sockfd > filed_sockettimeout_sockstatus_length) {
		return(0);
	}

	return(1);
}

static void filed_sockettimeout_expire(int sockfd, int length) {
	time_t now, expire;





	now = atomic_load(&filed_sockettimeout_time);

	expire = now + length;

	atomic_store(&filed_sockettimeout_sockstatus[sockfd].expiration_time, expire);





	return;
}

static void filed_sockettimeout_accept(int sockfd) {
	if (!filed_sockettimeout_sockfd_in_range(sockfd)) {
		return;
	}



	filed_sockettimeout_expire(sockfd, 60);

	atomic_store(&filed_sockettimeout_sockstatus[sockfd].thread_id, pthread_self());

	atomic_store(&filed_sockettimeout_sockstatus[sockfd].valid, true);



	return;
}

static void filed_sockettimeout_processing_start(int sockfd) {
	if (!filed_sockettimeout_sockfd_in_range(sockfd)) {
		return;
	}

	filed_sockettimeout_expire(sockfd, 86400);

	return;
}

static void filed_sockettimeout_processing_end(int sockfd) {
	if (!filed_sockettimeout_sockfd_in_range(sockfd)) {
		return;
	}

	filed_sockettimeout_expire(sockfd, 60);

	return;
}

static void filed_sockettimeout_close(int sockfd) {
	if (!filed_sockettimeout_sockfd_in_range(sockfd)) {
		return;
	}





	atomic_store(&filed_sockettimeout_sockstatus[sockfd].valid, false);





	return;
}

static void *filed_sockettimeout_thread(void *arg) {
	struct timespec sleep_time;
	time_t now, expiration_time;
	pthread_t thread_id;
	long idx;
	int count;
	bool valid;

	while (1) {
		for (count = 0; count < 10; count++) {
			sleep_time.tv_sec = 30;
			sleep_time.tv_nsec = 0;
			nanosleep(&sleep_time, NULL);



			now = time(NULL);

			atomic_store(&filed_sockettimeout_time, now);
		}





		for (idx = 0; idx < filed_sockettimeout_sockstatus_length; idx++) {
			valid = atomic_load(&filed_sockettimeout_sockstatus[idx].valid);

			if (!valid) {
				continue;
			}

			expiration_time = atomic_load(&filed_sockettimeout_sockstatus[idx].expiration_time);

			thread_id = atomic_load(&filed_sockettimeout_sockstatus[idx].thread_id);

			if (expiration_time > now) {
				continue;
			}

			filed_sockettimeout_close(idx);

			dup2(filed_sockettimeout_devnull_fd, idx);

			pthread_kill(thread_id, SIGPIPE);
		}


	}

	return(NULL);

	/* NOTREACH: We don't actually take any arguments */
	arg = arg;
}

	long maxfd, idx;

	maxfd = sysconf(_SC_OPEN_MAX);
	if (maxfd <= 0) {
		maxfd = 4096;
	}


	filed_sockettimeout_sockstatus = malloc(sizeof(*filed_sockettimeout_sockstatus) * maxfd);
	if (filed_sockettimeout_sockstatus == NULL) {
		return(-1);
	}

	for (idx = 0; idx < maxfd; idx++) {
		filed_sockettimeout_sockstatus[idx].valid = false;
	}

	filed_sockettimeout_sockstatus_length = maxfd;
	filed_sockettimeout_devnull_fd = open("/dev/null", O_RDWR);
	if (filed_sockettimeout_devnull_fd < 0) {
		return(-1);
	}

	return(0);
}

	/** reason must point to a globally allocated value **/
	log->reason = reason;
	log->http_code = error_number;

	filed_log_entry(log);

	/* Close connection */
	filed_sockettimeout_close(fileno(fp));

	fclose(fp);

	return;
}

/* Return a redirect to index.html */

	/* Log redirect */
	log->reason = "redirect";
	log->http_code = http_code;

	filed_log_entry(log);

	/* Close connection */
	filed_sockettimeout_close(fileno(fp));

	fclose(fp);

	return;

	/* Currently unused: path */
	path = path;

	size_t sendfile_size;
	off_t sendfile_offset, sendfile_sent, sendfile_len;
	char *path;
	char *date_current, date_current_b[64];
	int http_code;
	FILE *fp;




	/* Determine current time */
	date_current = filed_format_time(date_current_b, sizeof(date_current_b), time(NULL));

	/* Open socket as ANSI I/O for ease of use */
	fp = fdopen(fd, "w+b");
	if (fp == NULL) {
		filed_sockettimeout_close(fd);

		close(fd);

		log->buffer[0] = '\0';
		log->http_code = -1;
		log->reason = "fdopen_failed";

	log->sent_length = sendfile_sent;

	filed_log_entry(log);

	close(fileinfo->fd);

	if (request->headers.connection != FILED_CONNECTION_KEEP_ALIVE) {
		filed_sockettimeout_close(fd);

		fclose(fp);

		return(FILED_CONNECTION_CLOSE);
	}

	filed_sockettimeout_processing_end(fd);